| |
 |
Live center for small turning center. |
GL-1191 |
$57.00 |
Ball bearing mounted so that the center can rotate with the part. Sealed bearings are permanently lubricated. Fits #0 Morse taper.
|
 |
T-Nuts (set of 10) |
GL-3056 |
$14.95 |
| Replacement T-nuts that fit the slots in the bed of the small SpectraLight CNC machines. (Not for the eXpert mill or ProLight.) These are the short shoulder t-nuts that are tapped for a 10-32 screw. |
 |
|
| Tool Post |
GL-3057 |
$45.00 |
| Rocker tool post is designed to eliminate the need for shimming. The height of the cutting edge can be changed by simply adjusting the two clamping screws. |
 |
5/32" Hex T Driver |
GL-3020 |
$8.00 |
| This tool is used in place of the standard 5/32" hex key |
 |
Tool holder for cut-off tool |
GL-3002 |
$75.00 |
| Includes a parting tool (.040"or 1mm) |
|
Two position tool holder for 1/4" square turning tools |
GL-3003 |
$23.00 |
| Two position tool holder for 1/4" square turning tools |
|
Turning Tools |
GL-3006 |
$30.00 |
| This 3-piece set includes a right-hand tool (P/N 11920), a left-hand tool (P/N 11930), and a 60° threading tool |
| |
|
